[etherlab-users] Using BK1120

[Bilko AS, Oguz Dilmac]

Hello

We have a problem with configuring BK1120. We made EK1100 run without a 
problem.

We found out that they are using different protocols to communicate the 
modules (BK1120 K-Bus, and EK110 E-Bus).
We searched for information on how to create the cstruct for BK1120 and 
how to map the connected I/0 modules but we couldnt find an answer that 
exactly answers our question.

Until now we ran "ethercat cstruct" and copy that into our code and it 
goes to run state, fine, but we need an example or explanation of how 
the connected modules match the entries in cstruct, where to read or 
write to the I/O.

Thanks

-- 
Oguz Dilmac
ARGE Bolumu

Bilko AS, R&D Department
====================================
Perpa Ticaret Merkezi B Blok Kat 13 Nr. 2568
TR-34384 Okmeydani Istanbul Turkey
Tel : +90 212 220 07 40  Fax :   +90 212 210 47 01
e-mail : odilmac at bilko-automation.com
web site : http://www.bilko-automation.com