[etherlab-users] ethercat on BBB/Rasperry

[Jean-Philippe Pinget]

Hi,

Making research about Ethercat on embedded Linux, I found your website. 
It seems to be interesting for my project.

But I'm not an expert on Ethercat.

My goal is to drive an ETHERCAT MODULE (from BECKHOFF or others) with a 
RASPERRY PI or a BEAGLEBONEBLACK.

More precisely, you can see below what I want to do :



/I have a *Rasperry PI B+* and an *Ethercat Terminal Beckhoff. *//
//
//On my *rasperry PI B+*, I want to launch an *HMI *(a *Qt *Application). //
//
//On this *HMI *(drawn with *Qt*), there is a button (for example). From 
this button, I want to activate an output of the *Beckhoff Ethercat 
Terminal* (Sending an Ethercat command from the *RASPERRY PI B+*). //

/Can I do this with Etherlab ?
If yes, could you tell me what are the first steps ?
/

Best Regards. /
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140922/fef764fc/attachment-0002.htm>