[etherlab-users] enable-e1000 with-e1000-kernel

[Jürgen Kunz]

Hello.

Without *with-e1000-kernel* option, the e1000 driver for the current
running kernel version is used. For example, if you run a 3.14 kernel,
the driver files e1000_*-3.14 are used, if available. With
*with-e1000-kernel* option, the driver from selected kernel version is
used instead.
For example: --*with-e1000-kernel=3.4* will use e1000_*-3.4 driver files.
Selecting the driver kernel version may be required, if EtherCAT-drivers
are not available so far for the current running kernel. But there is no
guarantee for this to work.

Best regards,
Jürgen
_____________________
Dipl.-Inform. Jürgen Kunz

Technische Universität Darmstadt <http://www.tu-darmstadt.de>
FG Simulation, Systemoptimierung und Robotik
<http://www.sim.tu-darmstadt.de>
Hochschulstr. 10
64289 Darmstadt

Tel.: ++49 (0) 6151-16-70383
Fax: ++49 (0) 6151-16-6648
E-Mail: kunz(at)sim.tu-darmstadt.de
Homepage: http://www.sim.tu-darmstadt.de
Am 2015-04-22 um 11:32 schrieb 孙同亮:
>
> --enable-e1000
>
> --with-e1000-kernel
>
>  
>
> I will configure and build the EtherCAT Master,  I want to know the
> differences - using the *with-e1000-kernel *option and not using the
> *with-e1000-kernel *option.
>
> Thanks.
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20150422/14341519/attachment-0004.htm>