[etherlab-users] puzzle about check slave configuration

[殷士龙]

Hello, I have a new puzzle about slave configuration.
I know, when user app running, the master will check the given slave configuration to attach the real slave.
So I want to know  if this function ecrt_master_slave_config(...) will finally call the ecrt_master_slave_config_err(...) function?
If so, when I used correct position but wrong vendor id as the slave configuration for input, there was nothing wrong return.
But I can see the mismatch occurred from this command ethercat config
    0:0  0x00000002/0x00000000  -  - 
Is it indicating the checking does not do in this ecrt_master_slave_config(...) function or not call the
ecrt_master_slave_config_err(...) function?

Thanks for tips!

--

-------------------end---------------------
am strong, therefore I am.
--Yin(^-^)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20151120/34c4295d/attachment-0002.htm>