[etherlab-users] Etherlab installation issue [ubuntu 14]

[Preben Hjørnet]

We are hiring EtherCAT robotics control engineers .

venligst
Preben Hjørnet
Blue Workforce A/S
24609899
Den 19/11/2015 16.55 skrev "John Hubbard" <jhubbard at noao.edu>:

> On 11/18/2015 11:19 PM, Tommaso wrote:
>
>> Good morning,
>>
>> I'm a student interested in programming with etherlab but I've
>> encountered some problems during the installation.
>>
>> Could you give me a detailed guide in order to install all the elements
>> in boundle 2.1 with Ubuntu 14?
>>
>> Thank you for your help.
>>
>
> I just recently installed on an Ubuntu 14.04 system running the 3.16
> kernel.  I've attached some notes from my installation.  I largely followed
> the instructions from the pdf documentation.  For me the major key was
> disabling the realtek driver during the configure step.  For my system
> (non-real time) the generic driver seems to work fine.  Hope this helps.
>
> p.s.
> Including the error message(s) that you got from your install will
> generally allow the community to better assist you.
>
> --
> -john
>
> To be or not to be, that is the question
>                 2b || !2b
> (0b10)*(0b1100010) || !(0b10)*(0b1100010)
>         0b11000100 || !0b11000100
>         0b11000100 ||  0b00111011
>                0b11111111
> 255, that is the answer.
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20151119/7f8919d5/attachment-0003.htm>