[etherlab-users] Master autonomous scan feature controlling

[Peio Azkarate]

Hi,

First of all, I’m new to the Etherlab master.
I run the Etherlab Master on Ubuntu with Wireshark running locally.
When I load the Etherlab master’s driver, without any ethercat application running, I see Ethercat packets transmiting every 4ms.
My questions are:
Is posible controlling this autonomous behavior?.
Disable this autonomous scan and/or change scan period?.

Regards


Aviso legal: Este mensaje y los documentos adjuntos pueden contener información confidencial. Si usted lo ha recibido por error debe saber que la información contenida en el mismo es reservada y su uso no autorizado esta prohibido por la ley, por lo que le rogamos que nos lo comunique por la misma vía y proceda a borrar el mensaje. Legal advice: The contents of this email and any attachments may contain confidential information. If you have received it by mistake please be aware that the information is private and confidential and as such its non authorised use is legally protected, therefore we ask you to contact the sender and delete the message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20161027/3bf2fe38/attachment-0002.htm>