[etherlab-users] Unknown xml configuration

[Gavin Lambert]

On 28 September 2016 02:57, quoth carlos_jimenez:
> I have some problems to read values from a Gantner modules, and I have
> the configuration file of this modules, but there are some strange tags for
> me, I don't know how to use this tags with the master.
> 
> ...
> <Info>
>    <Mailbox>
> 	<Timeout>
> 	  <RequestTimeout>100</RequestTimeout>
> 	  <ResponseTimeout>2000</ResponseTimeout>
> 	</Timeout>
>    </Mailbox>
> </Info>

These have no equivalent in Etherlab; it uses its own built-in mailbox timeouts and you can't override them.  You also usually don't need to.

> <ESC>
>    <Reg0400>25000</Reg0400>
>    <Reg0420>100</Reg0420>
> </ESC>

These control the Process Data Watchdog, which is configured in Etherlab via the ecrt_slave_config_watchdog API.

> <Eeprom>
>    <ByteSize>2048</ByteSize>
>    <ConfigData>080C0204C8000000000000000000</ConfigData>
> </Eeprom>

This is basic configuration information which should already be programmed into the SII EEPROM by the vendor, so you shouldn't need to do anything with it.