[etherlab-users] Unknown xml configuration
carlos_jimenez
carlos_jimenez at encopim.com
Wed Sep 28 10:49:45 CEST 2016
Hello Gavin,
Thank you very much for ypur answer, I will try with the watchdog :)
Best regards
El 28-09-2016 00:49, Gavin Lambert escribió:
> On 28 September 2016 02:57, quoth carlos_jimenez:
>> I have some problems to read values from a Gantner modules, and I have
>> the configuration file of this modules, but there are some strange
>> tags for
>> me, I don't know how to use this tags with the master.
>>
>> ...
>> <Info>
>> <Mailbox>
>> <Timeout>
>> <RequestTimeout>100</RequestTimeout>
>> <ResponseTimeout>2000</ResponseTimeout>
>> </Timeout>
>> </Mailbox>
>> </Info>
>
> These have no equivalent in Etherlab; it uses its own built-in mailbox
> timeouts and you can't override them. You also usually don't need to.
>
>> <ESC>
>> <Reg0400>25000</Reg0400>
>> <Reg0420>100</Reg0420>
>> </ESC>
>
> These control the Process Data Watchdog, which is configured in
> Etherlab via the ecrt_slave_config_watchdog API.
>
>> <Eeprom>
>> <ByteSize>2048</ByteSize>
>> <ConfigData>080C0204C8000000000000000000</ConfigData>
>> </Eeprom>
>
> This is basic configuration information which should already be
> programmed into the SII EEPROM by the vendor, so you shouldn't need to
> do anything with it.
--
Carlos Jiménez
ENCOPIM S.L.
Ctra. Santiga, 104, P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15
==========================================================
La información contenida en la presente transmisión es confidencial y su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).
The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
==========================================================
More information about the Etherlab-users
mailing list