[etherlab-users] Using K-bus outputs from ethercat-master

[Yusuf GÜREL - Bilko]

Hi All,

We are using ethercat master for linux for E-Bus devices and servo drives
for long time. Recently we wanted to use K-bus devices. We adapted the
E-Bus code to it and done a few trials. We had no problem getting the
coupler to OP mode and reading from Inputs but we cannot write to the
Outputs. Neither from our application nor from the terminal. When i try to
write to Outputs i get Read-Only error.

Can someone give me an example code for this?
Thanks in advance.

Best Regards
Yusuf GUREL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20170529/0c1cb021/attachment-0002.htm>