[etherlab-users] ec_e1000e not compatible with Intel I218-LM NIC

[Benjamin Neef]

Thanks for your reply!

When ethercat is started with the generic driver (/etc/init.d/ethercat 
start) lspci -k says "Kernel driver in use: e1000e".

I will wait for the igb driver.


Am 18.09.2017 um 08:40 schrieb Dr.-Ing. Wilhelm Hagemeister:
> The igb driver is being worked on and it will be released in the next
> couple of weeks.
>
> Am 18.09.2017 um 01:42 schrieb Gavin Lambert:
>
>> I don’t know whether this applies to that specific card or not, but some
>> of the newer gigabit cards require the igb driver rather than the e1000e
>> driver, and that hasn’t been patched for EtherCAT yet.
>>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users

-- 
Dipl.-Ing. Benjamin Neef

Technische Universität Braunschweig
Institut für Werkzeugmaschinen und Fertigungstechnik (IWF)

Nachhaltige Produktion & Life-Cycle-Engineering

Langer Kamp 19b
38106 Braunschweig

Tel.:  +49 (0) 531  391 8751
Fax:  +49 (0) 531  391 5842

E-Mail:  b.neef at tu-bs.de
Internet: https://www.tu-braunschweig.de/iwf/pul