[etherlab-users] rtai_rtdm example code hangs after activating master

[Mohsen Alizadeh Noghani]

Running the rtai_rtdm example hangs at "ecrt_master_activate". This happens
in such a way that I can't even stop the process with a ctrl+c signal.
*Additional info:*
- Nothing out of ordinary in dmesg, the last message is,
*EtherCAT successfully requested master 0.*
- I'm using r8169 driver (the user example works fine) and RTAI 4.0.
- I did receive two warnings when make ing the example,
**** Warning: Linking the executable ec_rtai_rtdm_example against the
loadable module.*
**** liblxrt.so in not portable!*

**** Warning: Linking the executable ec_rtai_rtdm_example against the
loadable module*
**** librtdm.so is not portable!*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20181015/97f2a1ef/attachment-0002.htm>