[etherlab-users] rtai_rtdm example code hangs after activating master

[Mohsen Alizadeh Noghani]

I should have also mentioned that I'm using kernel 3.4.6 and IgH EtherCAT
Master 1.5.2.
Best,
Mohsen

On Mon, Oct 15, 2018 at 2:26 PM Mohsen Alizadeh Noghani <
m.alizad3h at gmail.com> wrote:

> Running the rtai_rtdm example hangs at "ecrt_master_activate". This
> happens in such a way that I can't even stop the process with a ctrl+c
> signal.
> *Additional info:*
> - Nothing out of ordinary in dmesg, the last message is,
> *EtherCAT successfully requested master 0.*
> - I'm using r8169 driver (the user example works fine) and RTAI 4.0.
> - I did receive two warnings when make ing the example,
> **** Warning: Linking the executable ec_rtai_rtdm_example against the
> loadable module.*
> **** liblxrt.so in not portable!*
>
> **** Warning: Linking the executable ec_rtai_rtdm_example against the
> loadable module*
> **** librtdm.so is not portable!*
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20181015/cdf57f3f/attachment-0003.htm>