[etherlab-users] AL States

[BUSSIERES Vincent]

Hello,

I'd like to display AL state in my HMI.

AL states are :

-        Bit0 : INIT

-        Bit1 : PREOP

-        Bit2 : SAFEOP

-        Bit3 : OP

But when I read AL states, states are respetively :


-        0x02      (0010)

-        0x03      (0011)

-        0x0a      (1010)

-        0x0e      (1110)

-        0x0a      (1010)

So, in some cases I don't know in which state I am ?
How can I determine AL State ?

Regards

Vincent BUSSIERES
Responsable Technique Logiciel

[1572337113342]
ZE Ma Campagne
36, Impasse Félix Nadar
16000 ANGOULEME
Tel: 33 (0)9.72.40.35.08
www.hemeria-group.com<https://webmail.nexeya.fr/owa/redir.aspx?C=GK_BqKCZef7LtPZnqnd_LGYr1NG9sz4Smy3iKIwO-pXqtJC7VgzXCA..&URL=http%3a%2f%2fwww.hemeria-group.com%2f>
P Afin de contribuer au respect de l'environnement, merci de n'imprimer ce courriel qu'en cas de nécessité.
Ce message et les fichiers pouvant être attachés sont confidentiels, réservés à l'usage unique des destinataires et n'engagent HEMERIA sous aucune forme que ce soit.
This email and any files transmitted with it are confidential, intented solely for the unique use of the recipients and don't commit HEMERIA.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20200626/b460ceb0/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5034 bytes
Desc: image001.png
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20200626/b460ceb0/attachment-0003.png>