[Etherlab-users] "Master0 dead" and unable to check fro masters/slaves

[Andreas Stewering-Bone]

Hello,

No, this is original IgH stable-1.5 branch.

Best regards

Andreas

Am Montag, dem 19.09.2022 um 14:40 +0300 schrieb Raz:
> Hey Mike
> Is this source inclues Gavin Lambert fixes as well ? 
> 
> On Mon, Sep 19, 2022 at 2:26 PM Mike O'Connor <mike at oeg.com.au>
> wrote:
> > Hi Henrik
> > 
> > I think you should really look at the work done at
> >
> https://build.opensuse.org/package/show/home:bone11111:branches:science:EtherLab/ethercat
> > You use this to download all the packages and tool as binaries,
> > removing 
> > your issues.
> > 
> > Cheers
> > Mike
> > 
> > 
> > On 19/9/2022 8:47 pm, Henrik Barie wrote:
> > > Hello Mike and Andreas,
> > >
> > > at this location I could only find the ethercatctl-file.
> > > However I think I found the right file now in 
> > > /usr/src/etherlanmaster-code/tools. The file is named "ethercat"
> > and I 
> > > also found several .o-files with etherlab commands like "master".
> > > Executing it with sudo ./ethercat master worked and the output
> > was 
> > > (after starting with "systemctl start ethercat"):
> > >
> > >
> > > Master0
> > >   Phase: Idle
> > >   Active: no
> > >   Slaves: 4
> > >   Ethernet devices:
> > >     Main: 88:a4:c2:bf:73:10 (attached)
> > >       Link: UP
> > >       Tx frames:   45398
> > >       Tx bytes:    2782824
> > >       Rx frames:   45397
> > >       Rx bytes:    2782764
> > >       Tx errors:   0
> > >       Tx frame rate [1/s]:    479    662    523
> > >       Tx rate [KByte/s]:     28.1   39.2   31.3
> > >       Rx frame rate [1/s]:    479    662    523
> > >       Rx rate [KByte/s]:     28.1   39.2   31.3
> > >     Common:
> > >       Tx frames:   45398
> > >       Tx bytes:    2782824
> > >       Rx frames:   45397
> > >       Rx bytes:    2782764
> > >       Lost frames: 0
> > >       Tx frame rate [1/s]:    479    662    523
> > >       Tx rate [KByte/s]:     28.1   39.2   31.3
> > >       Rx frame rate [1/s]:    479    662    523
> > >       Rx rate [KByte/s]:     28.1   39.2   31.3
> > >       Loss rate [1/s]:          0     -0      0
> > >       Frame loss [%]:         0.0   -0.0    0.0
> > >   Distributed clocks:
> > >     Reference clock:   Slave 0
> > >     DC reference time: 0
> > >     Application time:  0
> > >                        2000-01-01 00:00:00.000000000
> > >
> > > and for "slaves":
> > >
> > > 0:0  PREOP  +  EK1100 EtherCAT-Koppler (2A E-Bus)
> > > 1  0:1  PREOP  +  EL1104 4K. Dig. Eingang 24V, 3ms,
> > Sensorversorgung
> > > 2  0:2  PREOP  +  EL2004 4K. Dig. Ausgang 24V, 0.5A
> > > 3  0:3  PREOP  +  EL3062 2K.Ana. Eingang 0-10V
> > >
> > >
> > > I tried my Simulink Model again but it still doesnt work.
> > > I will attach a Screenshot of it.
> > >
> > > I attached a cable from Input 2 of EL1104 (which is +24 V) to
> > Output 1 
> > > of EL2004. The LED of EL2004 Output should now be on since it
> > recieves 
> > > 24V.
> > >
> > > I used Slave Index 1 for the EL1104 and Index 2 for the EL2004 as
> > it 
> > > was shown in the Terminal.
> > >
> > > Master is 0 and Vector Outputs enabled.
> > >
> > > Also the Master State-Module doesnt show any outputs.
> > >
> > >
> > >
> > > Regards
> > > Henrik
> > >
> > >
> > 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20220919/a66683c9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: This is a digitally signed message part
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20220919/a66683c9/attachment-0001.sig>