[etherlab-users] EL2502 problem

[Michael Sagner]

I can set the pulse width of EL2502 PWM outputs without a problem, but I'm
at a loss when it comes to setting their frequency.

According to the Beckhoff docs, index 0x1600/0x1601 must be deactivated, and
index 0x1602/0x1603 must be activated in order to do this.

 

Q: How do I do this using ecrt_.... commands? Are there any code samples
around somewhere?

 

M. Sagner

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20101109/b978b772/attachment-0003.htm>