[etherlab-users] Antw: Device Node Creation...continued [possible spam detected, rate 6]

[Oliver.Haala at semikron.com]

Hello Newell,

after make install and make modules_install you have to edit the file
/etc/sysconfig/ethercat

Set the driver and the MAC address. If the ethercat card differnce to 
the normal network card you can set it to FF:FF:FF:FF.FF, please see the 
comments in the file.

Regards
Oliver



>>> Newell Jensen <pillar2012 at gmail.com> 11/8/2010 10:05  >>>
Hello all,

Looks like I am having the same problem as Oliver but unfortunately when I
scour the mailing list, his solution is not stated for others (I think the
emails between people weren't sent to the list maybe?).  Here is a link to a
thread that asks his question and then in a latter thread he is no longer
getting this error due to the master working correctly and /dev/EtherCAT0
being created.

The problem I am facing:
http://www.mail-archive.com/etherlab-users@etherlab.org/msg00709.html 

Now it is solved:
http://www.mail-archive.com/etherlab-users@etherlab.org/msg00721.html 

Anyone now how I can get past this?

My setup is:

OS: Ubuntu 10.04 32-bit
kernel: 2.6.31-11-rt
rtai: 3.7.1-1
ethercat master: 1.5 devel snapshot

-- 

Newell

IMPORTANT NOTICE - The contents of this email and attachments are confidential. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately or notify us by telephone. While we take every reasonable precaution to screen out computer viruses from emails, attachments to this email may contain such viruses. We cannot accept liability for loss or damage resulting from such viruses.  The integrity of email across the Internet cannot be guaranteed and SEMIKRON will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to SEMIKRON.