[etherlab-users] Simulink parameters in Testmanarger

[Dr.-Ing. Wilhelm Hagemeister]

Hallo Lee,

Am 17.09.2012 22:57, schrieb Lee Magnusson:
> Wilhelm,
>
> Thank you, very helpful. Regarding aliases: Is there a way to get the alias to
> show up in the channel/parameter list? Are there other ways in which the alias
> is used, which I'm missing?

all attributes which come from the process are shown in the tree when 
you hover over a Parameter/Channelname.
In newer Testmangerversions you have to activate "show long hints" for 
this (right click in the tree). The alias which is defined in the 
(simulink)model is part of this attributes.

>
> My versions are etherlab: stable-1.3, testmanager, 3.5.12
>
> Regarding parameters, I now better understand how to store block parameters to
> file, which should be fine for my needs. It also would be great if I could save
> model parameters, and I'm wondering if that's possible. For example, I might
> define a simulink parameter using model explorer in either the model or matlab
> workspace. I can then use that parameter in a variety of blocks.

If you want do distribute Parameters to blocks in the whole model you 
can place a "constblock" connected to a "goto" somewhere on an higher 
level in your model and use
"from" blocks where you want to use this "const"block parameter.

Regards Wilhelm.